Daqing Petrochemical powder hydraulic Press robot automation project

2018-09-06

The daily inspection of the powder hydraulic press is to ensure the safe operation every day. Once a failure occurs, the daily inspection can help determine the cause of the failure. So, how to do the daily inspection of powder hydraulic press?




The daily inspection of powder hydraulic press has the following aspects:


(1) Oil quantity and temperature in the tank. Observe the tank level gauge, the liquid level in the tank should always maintain normal liquid level, otherwise it should be timely supplemented, the supplemented oil grade must be the same as the system oil grade, and after testing, in line with the specified indicators; The added oil should be filtered, and the filtration accuracy should not be lower than the system accuracy requirements.




(2) Oil leakage at various sealing parts and pipe joints. Leakage is inevitable and common in hydraulic system. Leakage leads to the reduction of system pressure, resulting in unstable speed of executive components, waste of oil, consumption of energy, reduce efficiency, oil temperature rise, pollution of the environment, and cause fire hazards. The leakage of the system mostly occurs in the fixed seal and the moving seal. The cause of leakage is usually seal damage, aging, damage or loosening of the connecting screw (caused by pipeline vibration) should be timely maintenance. Non-operational leakage is not allowed.




(3) Whether the screws at the pressure adjustment of the flow valve and other pressure valves are loose. Loose pressure regulating screw of relief valve will cause the working pressure of the system cannot reach the predetermined value or cannot establish the working pressure, and the system cannot work normally. The loosening of the regulating screw of the pressure reducing valve will make the outlet pressure reach the predetermined value, so that the pressure reducing circuit can not work normally.


share